Introduction
Play the role of fixing two steel gratings and fixing the steel gratings and the steel beams. Installing clips instead of welding installation is conducive to reuse of the steel gratings. The clips for Steel gtratings are usually divided into Type A, Type B, and Type C.
Different Types
Type A: Consisting of an upper pressing plate with double hooks, a lower pressing plate with teeth and an M8 hexagon socket bolt. It is mainly used for single-piece steel grating and steel beam installations, eliminating the need for manual drilling on steel beams, saving time and labor. It is recommended that at least four installation clips are used for each steel grating.
Type B: Consisting of a 3mm thick upper plate with double hooks (a hook can enclose two adjacent pieces together), a 3mm lower plate with teeth and a >M8 inner corner bolt. The lower plate has teeth to avoid slipping with the steel beam after the device and avoid falling. Mainly used for the connection of two steel gratings. Each connection should have at least three fixed points.
Type C: Consisting of an upper pressure plate with double hooks and an M8 hexagon head bolt that can be welded to the supporting beam. Mainly used for the connection of single steel grating and steel beam. The center bolt is fixed on the steel beam by welding. After the installation is completed, anti-corrosion measures should be adopted, which can be sprayed with self-painting, making low device cost.
More choices
General steel clips like M clips, G clips and L clips and so on are also suitable for steel gratings when necessary.
Surface finishes
Galvanized/Untreated
Comentarios